
Home decoration where easy to leak, in addition to the kitchen wall floor
"In addition to the most important kitchen wall ground waterproof, many small partners will think that the time on the" waterproof "is all done, but it is not, there are 7 places of" waterproof "is most easily ignored or even forgotten..."
1. Balcony
Balcony window cracks, pipes and wall corners are prone to moisture and water leakage in stormy weather. Waterproof treatment should first remove the stuffing and debris between the window frame and the wall, and then inject foam plugging agent in the gap, and the window frame should be coated with 2mm thick waterproof.
2. Yin and Yang horns
The intersection Angle between the plane and the facade of the roof and the Yin and Yang Angle are often cracked due to the stress concentration caused by the dry shrinkage of concrete and mortar and the temperature difference deformation, which is easy to infiltrate water vapor and lead to mold. These parts are generally more suitable for waterproof coils.
3. Floor heating waterproof
Northern residential pavement heating, indoor and outdoor temperature difference is large in winter, especially near the door, Windows, geothermal pipes are easy to produce condensate, infiltration into the concrete structure. Therefore, in the space of paving floor heating, the ground must be waterproof first, and waterproof coils are generally selected.
4. Waterway reconstruction trough
If the water pipe leaks, it is found that the water vapor has eroded the ground wall, resulting in mold, finish off, and even affect the solidity of the house, so it is necessary to waterproof the groove before the pipe is distributed after the groove.
5. Basement
The basement ventilation is poor, the moisture is heavy and easy to mold, can choose mortar waterproof agent, strong adhesion, can form a whole with the base surface, and high puncture strength, waterproof life can be the same life as the building, and the ability to resist bright water and water vapor is relatively strong.
6. Air conditioner hole
The air conditioning hole should have a certain Angle to the outside, and the hole and pipe gap should be sealed with foam glue, and then the edge should be sealed with glass glue.
7. Wooden bathroom door
In particular, the bottom of the wooden door is prone to moisture expansion, resulting in the door can not open and close normally.